22 EN BASIC OPERATIONS
Still Image Recording |
| NOTES: |
| |
|
| ● There may be differences in the brightness between the | ||
|
| recorded video and still image, even if the same subject is | ||
Power Switch |
| shot. |
| |
|
| ● To turn the shutter sound off, see page 26. | ||
MODE |
| ● For approximate number of storable images, see page 42. | ||
Recording Start/Stop Button | Continuous Shooting | |||
|
| Keeping the recording start/stop button pressed in step 3 | ||
|
| provides an effect similar to serial photography. (Interval | ||
Lock Button | between still images: approx. 0.3 seconds) | |||
To use this function, set [CONTINUOUS SHOOTING] to | ||||
|
| |||
|
| [ON]. ( pg. 26, 29) | ||
|
| ● Continuous shooting may not work well depending on | ||
When shooting with the flash, be | the recording medium. | |||
Deleting Files |
| |||
careful not to cover it. |
| |||
|
| If you press | during recording mode, the file recorded | |
|
| most recently will be deleted. | ||
|
| ● However, if the recording mode (video, still image or voice) is | ||
|
| switched or the power is turned off and on again after | ||
|
| recording, you cannot delete the file. | ||
1 Set the power switch to | while pressing down the |
|
| |
lock button located on the switch. |
|
| ||
2 Press MODE to select . |
|
|
|
●The camera is programmed to record still images on the medium in the CF slot by the factory preset. To switch the recording medium, see pages 26 and 27.
●To change the image size and picture quality, see pages 26 and 29.
3 Press the recording start/stop button. The still image is recorded.
●To check how the image looks before recording, press the recording start/stop button halfway and hold. The indicator appears and stops blinking when the captured image is focused. To cancel the recording, release the recording start/stop button. To record it on the recording medium, press the recording start/stop button fully.