| BASIC OPERATIONS EN 25 | |
Connecting to a TV or VCR | 1 Make sure all units are turned off. | |
2 Connect the camera to a TV or VCR as shown in the | ||
| ||
Open the cover. | illustration. | |
If using a VCR, go to step 3. | ||
| If not, go to step 4. |
To AV connector
(provided)
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
“Y/C” / “CVBS” Video |
| Cable Adapter* |
Out Select Switch |
| |
|
| |
|
|
To TV or VCR
A Black to
B Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)
C Red to AUDIO R IN** D White to AUDIO L IN**
*If your TV/VCR has a SCART connector, use the provided cable adapter.
**Not required for watching still images only.
NOTE:
Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses a video cable.
6 Start playback on the camera. ( pg. 21)
To choose whether or not the following displays appear on the connected TV●Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF]. ( pg. 26, 27)
●Counter
Set [SCENE COUNTER] to [ON] or [OFF]. ( pg. 26, 27)
(Pressing INFO button also turns on/off the displays.)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 14)
●To monitor the picture and sound from the camera without
inserting a recording medium, set the camera’s power switch to , then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camera is turned on.
●To connect the camera to a PC, refer to the software installation and USB connection guide.
Dubbing to a VCR
2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.