Necessary Settings before Use

Charging the Battery Pack

1 Close the LCD monitor to turn off the camera.

2 Attach the battery pack.

Slide the battery pack down until it locks in place.

Bottom of the Camera

BATT.

3 Connect the AC adapter.

DC Jack

AC Adapter

To AC Outlet (110V to 240V)

NOTES

You can also use the camera with just the AC adapter.

Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.

Date/Time Setting

1 Open the LCD monitor to turn on the camera.

2 When [SET DATE/TIME!] appears, select [YES] within 10 seconds.

SET DATE/TIME!

YES

NO

If you do not select within 10 seconds, the screen disappears. In such case, press and hold the POWER button and turn the camera on again.

3 Set the date and time.

DATETIME

JAN 31 2007 11 07 AM

Repeat this step to input the month, day, year, hour and minute.

The charge lamp blinks to indicate charging has started.

When the lamp goes out, charging is

fi nished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera

LTo detach the battery pack

Slide and hold BATT. ( step 2), then remove the battery pack.

LTo check the remaining battery power See page 15.

4 Touch the OK button to finish.

LTo change the date and time

1)Touch the MENU button.

2)Select [BASIC SETTINGS], and then [CLOCK ADJUST].

3)Set the date and time.

LTo return to the previous screen Select @.

LTo quit the screen Touch the MENU button.

14