JVC GZ-MG40E/EK Connecting to a TV or VCR, Playback on a TV, Dubbing to a VCR or DVD Recorder

MasterPage: Body_Left M5E3PAL_04Basic.fm Page 26 Tuesday, June 14, 2005 2:40 PM

26 EN VIDEO RECORDING & PLAYBACK

Connecting to a TV or VCR		● Set the video out select switch of the cable
		adapter as required:
		Y/C: When connecting to a TV or VCR which
	To S connector	accepts Y/C signals and uses an S-Video cable.
		CVBS: When connecting to a TV or VCR which
		does not accept Y/C signals and uses a video
Open the		cable.
		● Make sure you adjust the TV sound volume to its
cover.		minimum level to avoid a sudden burst of sound
		when the camera is turned on.
To AV connector		Playback on a TV
		1 Make sure all units are turned off.
AV Cable	S Cable	2 Connect the camera to a TV or VCR as
	(optional)
(provided)		shown in the illustration.
		If using a VCR, go to step 3.
		If not, go to step 4.
		3 Connect the VCR output to the TV input,
		referring to your VCR’s instruction manual.
		4 Turn on the camera, the VCR and the TV.
		5 Set the VCR to its AUX input mode, and set
“Y/C” / “CVBS”		the TV to its VIDEO mode.
	Cable Adapter*	6 Start playback on the camera. ( pg. 24)
Video Out Select

Switch

To choose whether or not the following displays appear on the connected TV

To TV or VCR

A White to AUDIO L IN** B Red to AUDIO R IN**

C Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)

D Black to S-VIDEO IN (Connect when your TV/ VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

*If your TV/VCR has a SCART connector, use the provided cable adapter.

**Not required for watching still images only.

NOTES:

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Centre described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camera. The core filter reduces interference.

●It is recommended to use the AC adapter as the power supply instead of the battery pack. (
pg. 16)

●Date/Time

Set [DATE/TIME] to [AUTO], [ON] or [OFF]. (
pg. 48, 49)

●Counter

Set [SCENE COUNTER] to [ON] or [OFF]. (
pg. 48, 49)

(Pressing INFO/ button also turns on/off the displays.)

Dubbing to a VCR (or DVD Recorder)

The following explains how to dub to a VCR. When dubbing to a DVD recorder, refer to its instruction manual.

1 Perform steps 1 to 6 above.

2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.