MasterPage: Start_Right
M5E3PAL.book Page 19 Tuesday, June 14, 2005 1:40 PM
GETTING STARTED EN 19
Brightness Adjustment of the Display
The brightness of the display can be adjusted.
1 Set the power switch to 
or 
while pressing down the lock button located on the switch.
2 Open the LCD monitor fully. ( pg. 9)
3 Press MENU. The menu screen appears.
4 Press 
/ 
to select [DISPLAY], then press 49.
5 Press 
/ 
to select [BRIGHT], and press 49.
The brightness control indicator appears.
6 Press 
/ 
until the appropriate brightness is reached.
7 Press 49 to clear the brightness control indicator from the display.
Grip Adjustment
1 Adjust the velcro strip.
2 Pass your right hand through the loop and grasp the grip.
3 Adjust your thumb and fingers through the grip to easily operate the recording start/stop button, power switch and zoom lever. Be sure to fasten the velcro strip to your preference.
Tripod Mounting
To attach the camera to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camera. Then tighten the screw clockwise.
● Some tripods are not equipped with studs.
