JVC GZ-MG40E/EK manual Following indications appear on the screen, Battery indicator

Models: GZ-MG40E/EK

1 64
Download 64 pages 47.7 Kb
Page 55
Image 55

MasterPage: Menu_Right M5E3PAL.book Page 55 Tuesday, June 14, 2005 1:40 PM

REFERENCES EN 55

NO IMAGE FILES STORED!

Warning IndicationsAppears if there are no still image files when you attempt still image playback.

The following indications appear on the screen.

CLOSE COVER

(Battery indicator)

Displays the battery remaining power. Remaining power level

High

Exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

SET DATE/TIME!

Appears when the date/time is not set. ( pg. 18)

Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 18)

Appears when the SD card cover is opened during file copy/move operation. ( pg. 41)

NO MEMORY CARD

Appears when the SD card is not inserted to the SD slot for file copy/move operation. ( pg. 41)

NO SUPPORTED FILES

Appears when there is no JPEG (still image) files to be copied or moved in recording media. ( pg. 41)

NUMBER OF FOLDERS OVERFLOW Appears when the number of folders exceeds the limit for file copy/move operation.

LENS CAP

Appears for 5 seconds after power is turned on with the power switch set to , if the lens cap is attached or when it is dark.

PLEASE INSERT MEMORY CARD!

Appears when no SD card is inserted in the SD slot. ( pg. 20)

HARD DISK DRIVE IS NOT FORMATTED Appears when the built-in hard disk needs to be formatted.

THIS CARD IS NOT FORMATTED Appears when an unformatted SD card is inserted.

HARD DISK DRIVE IS FULL

Appears when the built-in hard disk is full and recording is not possible.

MEMORY IS FULL

Appears when the SD card is full and recording is not possible.

HDD ERROR!

MEMORY CARD ERROR! REINSERT CARD OR CHANGE CARD.

Appears when some errors occured with the recording media.

CHECK CARD’S WRITE PROTECTION SWITCH

Appears when you attempt recording when the write protection tab on the SD card is set to the “LOCK” position. ( pg. 20)

NO VIDEO FILES STORED!

Appears if there are no video files when you attempt video playback.

MEMORY CARD ERROR! REINSERT CARD OR CHANGE CARD.

Appears when the camera does not recognise the loaded SD card. Remove the card once and insert it again or replace with another card.

( pg. 20)

FILE SYSTEM MAY HAVE PROBLEM. FORMAT IS RECOMMENDED AFTER COPYING WANTED DATA.

The file system of the recording medium may have a problem. It is recommended to copy the data for backup, then format the medium.

( pg. 20)

VIDEO MANAGEMENT FILE IS BROKEN. TO RECORD/PLAYBACK VIDEO, RECOVERY IS REQUIRED. RECOVER?

The video management file is broken. Recovery is required to record or play back video files. Press / to select [YES], then press 49 to recover the video management file. If the desired video file is not displayed on the video index screen in spite of the file recovery, the file is moved to the [EXTMOV] folder. Press the recording start/stop button on the index screen to display [MPG], and then select the desired file.

REFERENCES

CONTINUED ON NEXT PAGE

Page 55
Image 55
JVC GZ-MG40E/EK manual Following indications appear on the screen, Battery indicator