54 EN REFERENCES
MasterPage: Body_Left
Other problems
The power/charge lamp on the camera does
not light during charging.
●Charging is difficult in places subject to extremely
high/low temperatures.
HTo protect the battery, it is recommended to
charge it in places with a temperature of 10°C to
35°C. (墌pg. 58)
The data process is too slow after the power
is switched on or the mode is changed.
●There is a large number of still images (approx.
1,000 or more) stored in the recording medium.
HCopy the stored files to a PC, and delete them
from the recording medium.
[SET DATE/TIME!] appears.
●The built-in clock's rechargeable lithium battery is
discharged.
●The previously set date/time is erased.
HConnect the camera to an AC outlet using the AC
adapter for over 24 hours to charge the clock's
lithium battery. Then set the date/time. (墌pg.18)
Files cannot be deleted.
●Files are protected.
HRemove protection from the files and delete them.
(墌pg. 38, 50)
When the image is printed from the printer, a
black bar appears at the bottom of the
screen.
●This is not a malfunction.
HBy recording with DIS activated, this can be
avoided. (墌pg.50)
Images on the LCD monitor appear dark or
whitish.
●In places subject to low temperature, images
become dark due to the characteristics of the
LCD monitor. This is not a malfunction.
HAdjust the brightness and angle of the LCD
monitor. (墌pg.9, 19, 49)
●When the LCD monitor's fluorescent light reaches
the end of its service life, images on the LCD
monitor become dark.
HConsult your nearest JVC dealer.
Coloured bright spots appear all over the
LCD monitor.
●The LCD monitor is made with high precision
technology. However, black spots or bright spots
of light (red, green or blue) may appear constantly
on the LCD monitor. These spots are not
recorded on the picture. This is not due to any
defect of the unit. (Effective dots: more than
99.99 %)
The SD card cannot be removed from the
camera.
HPush in the SD card a few more times. (墌pg.20)
Picture does not appear on the LCD monitor.
●The LCD monitor's brightness setting is too dark.
HAdjust the brightness of the LCD monitor.
(墌pg. 19, 49)
M5E3PAL.book Page 54 Tuesday, August 2, 2005 4:04 PM