22 EN Still Image Recording
Preparation: Open the LCD monitor. ( pg. 10)
1 Set the power switch to 
.
Slide while pressing down the lock button.
Power off
Playback
Recording
Lock button
Zoom Lever
2Set the MODE switch to 
.
: Video mode
: Still image mode
●The camera is programmed to record still images on the
3 Press the REC/SNAP button to start recording.
60 FINE | 9999 |
| PHOTO |
The PHOTO indicator appears during recording.
●To check how the image looks before recording, press the REC/SNAP button
halfway and hold. The 
indicator appears and becomes green when the captured image is focused. To cancel the recording, release the REC/SNAP button. To record it on the recording medium, press the REC/SNAP button fully.
To change the picture quality ( pg. 59)
NOTES:
●Still images are recorded at 4:3 size. They cannot be recorded at 16:9 size.
●If the camera is not operated for 5 minutes while the power is on using the battery pack, it turns itself off
automatically to conserve power. To turn the camera on again, set the power switch to OFF, then to 
or 
. When using the AC adapter, the camera enters the sleep mode (the access lamp lights and the LCD monitor turns off). To cancel the sleep mode, perform any operation such as zooming.
