JVC GZ-MG505AH EN Print Setting Continued, Direct Printing with PictBridge Printer, Select PRINT

48 EN Print Setting (Continued)

Direct Printing with PictBridge Printer

If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera directly to the printer with the USB cable. DPOF setting can also be used. (
pg. 47)

To Print by Selecting a Still Image

Preparation:

●Set the power switch to .

●Set the MODE switch to .

1

REC MEDIA SETTING

DATE/DISPLAY

DPOF

DIRECT PRINT

EFFECT

PROTECT

DELETE

2 Select [DIRECT PRINT].

Select

Set

●[PLEASE CONNECT PRINTER] appears.

3 Connect the camera to the printer with the USB cable.

●After a while, the print menu appears.

SELECTED PRINT

DPOF PRINT

CANCEL

4 Select [SELECTED PRINT].

Select

PRINT THIS IMAGE

Set

SET

5 Select the desired Image.

Select
Set	NUMBER OF PRINTS
	DATE	OFF
	PRINT
	CANCEL

6 Press / to select menus and press / to select settings.

●[NUMBER OF PRINTS]:

The number of prints can be set from 1 to 99.

●[DATE]:

Set whether to print the date and time.

7 Select [PRINT].

Select

Set

To stop printing after printing starts

1)Press 49.

2)Press / to select [EXECUTE], then press 49.

NOTE:

If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select [DIRECT PRINT] in the menu again, and then reconnect the cable.

To Print Using the DPOF Settings

If the printer is compatible with DPOF, you can use the DPOF settings. (
pg. 47)

After performing step 1-3

4 Select and set items as follows. [DPOF PRINT] [PRINT]

Select

Set

●To confirm the DPOF setting, press / to select [CHECK SETTINGS], then press 49. After that, press MENU to return to the previous menu.