Open the terminal cover (SD card cover)

A Open the LCD monitor.

(Rear)

B Slide down the terminal cover

lock and slide the cover aside

 

C Lift the cover slowly.

 

oTo close

Not properly closed if the red mark is visible!

Leave the LCD monitor open first.

A Flip down the cover slowly while making sure the gray waterproof seal fits into the opening at the terminals.

BPress the entire cover against the camcorder with equal force and firmly attach the cover completely.

C Slide the cover until it clicks into place.

(The cover is not properly closed if the red mark at the terminal cover lock is visible.)

CAUTION

0Do not apply excessive force when opening or closing the terminal cover.

0Do not open or close the terminal cover with wet or dirt/sand-covered hands.

0Do not allow any dirt, lint, hair, sand, and other foreign substances to accumulate between the waterproof seal and the case.

0Never damage or scratch the waterproof seal and terminal cover. Doing so can result in leaks. If the seal is damaged, contact your nearest JVC Service Center for a replacement. (Charges apply.)

0Read the “Detailed User Guide” carefully before using the camcorder under water or in places exposed to water droplet.

EN 7

Page 7
Image 7
JVC GZR10RUS, GZR10BUS, GZR10AUS manual Open the terminal cover SD card cover, To close