JVC GZR10BUS, GZR10RUS, GZR10AUS manual Inserting an SD Card, Open the terminal cover

Inserting an SD Card

Insert a commercially available SD card before recording.

Open the terminal cover.	Insert an SD card.
(Rear)	Label

* Before inserting the SD card, close the LCD monitor to turn off this unit.

oTo remove the SD card

Push the SD card inward once, then pull it out straight.

NOTE

Operations are confirmed on the following SD cards.

Manufacturer	Panasonic, TOSHIBA, SanDisk
Video A	Class 4 or higher compatible SD card (2 GB)/
	Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
	Class 4 or higher compatible SDXC card (64 GB to 128 GB)
	0 When recording with video quality [UXP], Class 6 or
	higher is recommended.
Still Image B	SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /
	SDXC card (64 GB to 128 GB)

0Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss.

0This unit is not guaranteed to operate with all SD cards, even when using the ones specified above. Some SD cards may not work due to specification changes, etc.

0To protect the data, do not touch the terminals of the SD card.

0When using an SDXC card, check its compatibility with the OS of your computer by referring to the Detailed User Guide.

0Do not use a miniSD card or microSD card (even if the card is inserted in an adapter). It may cause malfunction to the camcorder.

EN 9