10
Remote control buttons and functions
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH

Choose the ZOOM mode

1 Press the c button to display the ZOOM menu
2 Press the 6 buttons to choose a ZOOM mode. Then
press the a button
The picture expands and the chosen ZOOM mode is displayed in
about 5 seconds.

Adjusting the visible area of the picture

If subtitles or the top (or bottom) of the picture are cut off, you can
adjust the visible area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the ZOOM mode
indicator
The indicator appears.
3 While it is displayed, press the 6 buttons to change
the position of the picture
• You cannot adjust the visible area in REGULAR or FULL
mode.
The visible area adjustment is saved even after the TV channel is
changed.
However, it is cancelled if the following operations are performed.
• The power is turned off/on
• The ZOOM mode is changed
• The X (Multi) button, f (Freeze) button, or g (Text) button is
pressed
• The TV is switched between TV mode and VIDEO mode
CINEMA SURROUND function
You can enjoy sounds with a wider ambience.
• This function does not work for the sound from headphones.
Press the 2 button to select one of CINEMA
SURROUND modes
HIGH/LOW:
When you listen to stereo sound, please select HIGH or LOW mode.
You can enjoy sound similar to the experience at the theatre.
When you combine the functions of A.H.B. and BBE, you can enjoy
more powerful sound.
• When you set the CINEMA SURROUND function to HIGH
mode, there may be slight volume distortion. If that occurs, please
switch to LOW mode. The effect of CINEMA SURROUND
functions will be less noticeable, but the volume distortion will be
corrected.
MONO:
Select the MONO mode, to listen to the mono sound.
You can enjoy the sound for a wider audience similar to stereo sound.
OFF:
The CINEMA SURROUND function switches off.
• You can choose the CINEMA SURROUND mode with the
“SOUND menu” (see page18).
Using the “Freeze” function
You can view the current programme as a still picture.
1 Set the VCR/TV/DVD switch to the TV position
When using the “Freeze” function, set the VCR/TV/DVD switch
to the TV position.
2 Press the f button
The still picture of the current picture will appear.
To cancel the “Freeze” function:
Press the f button, the 6 p buttons or the number
buttons.
• The “Freeze” function does not work while a sub-picture is
displayed.
• The still picture cannot be output from the TV.
• The “Freeze” function does not work for picture of PC signals.
ZOOM
OK
REGULAR
AUTO
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
16 : 9 ZOOM
current
programme still picture
HD-Z70&56RX5_Eng.book Page 10 Wednesday, August 24, 2005 10:30 AM