Maintenance Mode (Cont'd) Function:
Log current user out and return to User Login Mode.
Save OSD window parameters for the port
Return to Command Mode
Keystroke:
Q (Only displayed when security is active)
Enter
Esc
NOTE: Based on different scan rates, the OSD window may appear in different areas of the monitor as different CPU ports are selected. The Maintenance Mode functions allow placement of the window in a particular area of the monitor and the window will return there when the
Help Mode
To enter Help Mode press the <F1> key from the Command Mode menu (see page 12).
Help Mode displays a list of commands with a short explanation of their function. The following options allow the user to quickly obtain information on any command.
Function:
View the previous page of help if available
View the next page of help if available
Exit HELP and return to previous mode
Keystroke:
Page
Up
Page
Down
Esc
Keyboards
The keyboard configuration of each CPU is saved in the NTI Switch. For example, if the CPU attached to Port 4 had CAPS LOCK and NUM LOCK selected the last time that CPU was accessed, then they will automatically be set when that CPU is accessed again.
Key Equivalents
Using the chart below, find the character needed to be typed on the CPU being accessed, then follow the row across for the equivalent on the keyboard device being used.
PS/2 101 | WINXX | SUN Keyboard |
Compose | ||
SB+Alt | Logo | Meta |
SB+RT Arrow | SB+RT Arrow | Power |
SB = Space Bar
L and R = Left and Right keys when two keys are marked the same on a keyboard.
+(SB + Alt) = Press keys simultaneously
15