User Login Mode
User Login Mode requires a user to login with a user name and password from the list created by the administrator. With security enabled, the user will be locked to the current CPU and the login screen will remain on the monitor until the user logs in.
Function:
Add a character to the user name/password
Remove previous character from the user name/password
Submit user name/password
Exit USER LOGIN and return to previous mode. This function is only available if security is not currently enabled.
Keystroke:
or | Shift | + | (Type any upper or lower case | ||
alphabetical or numeric character) | |||||
| Backspace |
|
|
|
|
|
|
|
| ||
Enter |
| If the password submitted is incorrect, the user will not be able | |||
| to proceed. |
| |||
|
|
|
| ||
|
|
| If the password submitted is correct, the user will proceed to | ||
Esc |
|
| Normal Mode. |
| |
|
|
|
|
| |
|
|
|
|
|
|
Additional OSD Modes Available With Security
Administration Functions
Administration mode enables the administrator to select a port for extended status information or setup users and assign system access rights to those users.
Function:Keystroke:
Enter Administration Options | A | |
mode | ||
Enter Port Status mode | Enter | |
for selected port | ||
| ||
Exit Administration and | Esc | |
Return to previous mode | ||
|
Administration Options
To enter the Administration Options mode: press <A> from the Maintenance Mode menu. (See page 14 for Maintenance menu.)
The Administration Mode (see Fig. 4) can be accessed only when security features are activated and the administrator is logged- in. Users other than the administrator are not allowed to enter the Administration Mode.
If a different user is
Administration Mode allows the administrator to use the following functions:
Function:Keystroke:
Change the administrator’s | C |
password |
Disable security | S |
|
8