CS - change single USER channel
FORMAT: CS AA,XX,YY<CR>
CS = "change single USER" command followed by at least one space
| AA = unit address |
| XX = CPU to connect |
| YY = USER to change |
RESPONSE: | *<CR> (command received and executed OK) |
| ?<CR> (syntax or transmission error occurred) |
RO - read single USER channel | |
FORMAT: | RO AA,XX<CR> |
| RO = "read USER" command followed by at least one space |
| AA = unit address |
| XX = USER to read |
RESPONSE: | 1) *<CR> (command received and executed OK) |
| ?<CR> (syntax or transmission error occurred) |
| 2) XX<CR> (XX = CPU connected) |
RU - read unit size | |
FORMAT: | RU AA<CR> |
| RU = "read unit size" command followed by at least one space |
| AA = unit address |
RESPONSE: | 1) *<CR> (command received and executed OK) |
| ?<CR> (syntax or transmission error occurred) |
XX,YY<CR> (XX = # of CPU’s, YY = # of USERS)
RS232 INTERFACE TEST PROGRAM DESCRIPTION
This software allows a user to test the functions of an NTI server switch, matrix switch or
Main Options
• | Matrix Options | - send commands to the matrix unit. |
• | Setup Options | - set COM port, baud rate, and unit address |
• | About SERTEST | - display the program version |
If Matrix Options is selected, the following menu is displayed:
MATRIX OPERATIONS
1)Reset Unit (1)
-send a reset command to the switch
-the current unit address is displayed in parentheses
2)Reset All Units
-send an internal reset command to all switches
3)Connect KVM Output/User to an Input/CPU
-connect an output to an input (KVM ports only)
4)Connect All KVM Outputs/Users to an Input/CPU
-connect all outputs to an input (KVM ports only)
5)Connect Audio Output/User to an Input/CPU
-connect an output to an input (Audio ports only)
6)Connect All Audio Outputs/Users to an Input/CPU
-connect all outputs to an input (Audio ports only)
7)Change Mute Status for Audio Output/User
-mute or
8)Change Volume for Audio Output/User
-change Audio port output volume
18