20

EDITING

Edit To OrFrom AnotherVideoRecorder
You can use your video recorder as the source player or the
recording deck.

MAKE CONNECTIONS

1
Connect the player’s AUDIO/VIDEO OUT connector to
the recorder’s AUDIO/VIDEO IN connector.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . you can use the AV1 IN/OUT or AV2 IN connec-
tors. However, the AV2 IN connector is only
available on the A233E, A237E and A433E.

SET RECORDING DECK’S

INPUT MODE

2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG. to select depending on the
connector being used — “AU 1” or "AU" for the AV1
IN/OUT connector, or “AU 2” for the AV2 IN
connector.
(For A233E and A433E) When using the AV2 IN
connector, make sure the AV2 SELECT switch is set to
"AV2".

START SOURCE PLAYER

3
Engage its Play mode.

START RECORDING DECK

4
Engage its Record mode.
NOTE:
All necessary cables can be obtained from your dealer.
12
45
3
6
8
0
79
1
3
2
NUMBER "0"
TV PROG.
TV Receiver
VIDEO
CHANNEL
RF Cable (provided)
Recorder
Another recorder
TV Receiver
21-pin SCART Cable
(not provided) RF Cable (provided)
VIDEO
CHAN-
NEL
Player
Another recorder
AV2 SELECT
switch
21-pin SCART
Cable (not provided)
AV2 SELECT
switch
Your recorder
Recorder TV Receiver
Player Your recorder