JVC HR-A47U Basic Playback Features, 16 EN, Changing display information, Checking tape position

16 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Playback

Features

SP EP

VCR

D –1, 2, 3

C

A Changing display information

Press DISPLAY during playback.

Each time you press the button, the front panel display shows the time counter and the clock time alternately.

Time Counter Clock Time

To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” ( pg. 21).

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

B Checking tape position

STOP/EJECT

( 7 / 0 )

The tape position indicator
appears on screen in the
following cases:
When you change the VCR
operation mode from the	B
stop mode to fast forward or

++ + E

E –b

A

rewind mode.

When you perform an Index

Search ( pg. 18) or Instant Review (

COUNT 0:33:27

pg. 18).

1	2	3
		2
4	5	6
7	8	9
C. RESET	0	4	E –C

D –2

1

E –a, b, cC

E –aSTOP ( 7 )

The position of “ ” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.

NOTES:

"SUPERIMPOSE" must be set to “ON”, or the indicator will not appear ( pg. 28, 29 ).

It may take a few seconds for the tape position indicator to be displayed.

C Playing back tape repeatedly

— Repeat Play

You can play back a tape repeatedly (100 times).

While playing back a tape, press and hold PLAY ( 3 ) for more than 5 seconds.

The play indicator ( # ) on the front display panel starts flashing slowly, and a tape will be played back 100 times.

To stop playback, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.