EN 19

Basic

Recording

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

FF ( ` )

PLAY ( 3 )

POWER

REW ( 1 )

1 Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

2Select recording channel

On the front panel:

Press CH.

On the Remote:

a– Press CH + or . or

b– Press the Number keys.

If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel, to view the program to be recorded.

SP EP

VCR

2 3

4

STOP/EJECT

( 7 / 0 ) PAUSE ( 8 )

3

4

Set tape speed

Press SP/EP to set the recording speed.

Start recording

On the front panel:

Press REC ( ƒ ).

On the Remote:

While holding REC ( ƒ ), press PLAY ( 3 ).

TV/VCR

1

4

7

1

REW ( 1 )

4

POWER

2 3

2

5 6 2b

8 9

0

4

 

2a

3

FF ( ` )

PAUSE ( 8 )

STOP ( 7 )

To pause recording

Press PAUSE ( 8). To resume recording, press PLAY ( 3 ).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

To rewind the tape – when the tape is not running. Press REW ( 1 ).

To fast-forward the tape – when the tape is not running. Press FF ( ` ).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.

You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab

Page 19
Image 19
JVC HR-A47U manual Basic Recording, Select recording channel, Set tape speed, Start recording