JVC HR-A47U Edit To Or From Another VCR, Connection, Editing, 1Make connections, Load cassettes

EDITING EN 31

Edit To Or

From Another

VCR

You can use your VCR as the playback or recording VCR. Refer also to the other VCR’s instruction manual for connection and its operations.

1Make connections

Connect an audio/video cable between the playback VCR’s audio/video output connectors and the recording VCR’s audio/video input connectors.

Connection
Ex. When using this VCR as the playback VCR
This VCR (for playback)			2
		ANT. IN	3
	OUT
	AUDIO	RF OUT
	VIDEO
	CH3 CH4
To AUDIO/
VIDEO OUT
	Audio/video cable
	(not supplied)
Another VCR	To Audio/		4
(for recording)	video Input
			5
			6

When using this VCR as the recording VCR, connect this VCR’s audio/video input connec- tors to the audio/video output connectors on the other VCR.

Load cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.

Select input mode on recording VCR

Select the correct external input on the other VCR.

On this VCR (when using this VCR as the recording VCR);

Select “F-1” — when connecting the other VCR to the audio/video input connectors on the front panel.

On the front panel:

Press CH5°.

On the Remote:

Press the Number key "0 (AUX)" or CH +/–.

Select EDIT function

Set the EDIT function to “ON”.

On this VCR, follow the procedure described on pages 28 and 29.

Start playback

Press PLAY ( 3 ) on the playback VCR.

NOTE:

If the playback VCR is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting playback ( pg. 28 and 29).

Start recording

Press REC ( ƒ ) on the recording VCR.

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “AUTO PICTURE” is set to “OFF”) after you finish dubbing the tapes ( pg. 28 and 29).