– Initial Settings –
Setting channels manually
–Manual Channel Set
You can add the channels you want or delete the channels you do not want manually.
Playback
Basic Playback
1Load a cassette
1Access Menu screen, then CH Setup screen
Press MENU on the Remote. Press SET
2Access ADD/DELETE Mode
Press SET –/+ to select “ADD/ DELETE”, then press ENTER.
| MENU |
|
|
| TIMER REC SET |
|
|
|
|
| |
| AUTO REPEAT | ON | OFF |
| SAP | ON | OFF |
| |||
| |||
| CH SETUP |
|
|
| SYSTEM SETUP |
|
|
|
|
| |
|
|
| |
| CH SETUP |
|
|
| TV CATV |
|
|
|
|
| |
| AUTO CH MEMORY |
| |
|
| ||
|
| ||
A | DDADD/DELETE |
| CH012 |
| POWER |
|
| PLAY |
STOP/EJECTREC | REW | FF |
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.
|
| |
| Add or Delete desired |
|
3 | ||
| want to add or delete. | |
| channels |
|
1 Press SET |
| |
| select a channel number you |
|
2To add channels
Press ENTER until “ADD” appears on the screen to set to add the unmemorized channel.
To delete channels
Press ENTER until “DELETE” appears on the screen to set to delete the channel from memory.
Repeat 1 to 2 to add or delete other channel.
3 Press MENU three times to return to normal screen.
NOTE: You can’t select “CH SET UP” if you set the channel to “L”.
•Do not apply too much pressure when
inserting.
•The VCR turns on, and the counter is reset, automatically.
•If the cassette’s record safety tab has been removed, playback begins automatically.
•If you press any operation buttons while the cassette is not loaded, ““ will flash on the screen for 4 seconds.
2 Start playback
Press PLAY ().
During playback
Stop playback
Press STOP ( ) on the | OR Press STOP/EJECT (■/ |
Remote. | ) on the VCR. |
Pause playback and view still picture
Press PAUSE.
• Press PLAY () to resume normal playback.
Pause and
Press PAUSE to pause, then press PAUSE repeatedly.
Press PLAY () to resume normal playback.