Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY
1 Press PROG CHECK. The recording start and stop times appear on the front display panel. Then press OK and the date and the channel position appear. Each time you press PROG CHECK the next program’s informa- tion appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder’s power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder’s power turned on, press CANCEL. All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2 Input the appropriate data using the START
E
N
21
PDC/VPS Recording
Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over advertised times you preset in the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.
To Use PDC/VPS Service . . .
The default setting for PDC/VPS is “ON”. To cancel PDC/VPS, press NUMBER key “7” so that the PDC/VPS indicator (
) on the display panel disappears during ShowView or regular timer programming.
NOTES:
●When you manually enter programmes (regular timer programming), set the start time (PDC or VPS time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.
●PDC/VPS recording is also possible when a satellite tuner or a cable system is connected to AV2 IN on your recorder.
