Xerox WorkCentre PE16 Try again after a few minutes, Wait an hour or so for the line to, Guide

Display	Meaning	Suggested solutions
	The remote party did not	Try again after a few minutes.
Line Busy	answer or the line is
	already engaged.
	Your machine cannot	Try again. If the problem persists,
	connect with the remote	wait an hour or so for the line to
Line Error	machine or has lost	clear and try again.
	contact because of a
		Or, turn the ECM mode on. See the
	problem with the phone
	line.	Facsimile User’s Guide.
	You have attempted to set	Load a document and try again.
Load Document	up a copy or fax operation
	with no document loaded.
	A problem has occurred in	Unplug the power cord and plug it
LSU Error	the LSU (Laser Scanning	back in. If the problem persists,
	Unit).	please call for service.
	The memory is full.	Delete unnecessary documents,
		retransmit after more memory
Memory Full		becomes available or split the
		transmission into more than one
		operation.
	The remote fax machine	Try again. Make sure that the
No Answer	has not answered after	remote machine is operational.
	several redial attempts.
No Cartridge	The toner cartridge is not	Install the toner cartridge. See
	installed.	page 1.9.
	The speed dial location	Dial the number manually using the
No. Not		number keypad or assign the
	you tried to use has no
Assigned		number. See the Facsimile User’s
	number assigned to it.
		Guide.
No Paper	The paper in the paper	Load paper in the paper tray. See
	tray has run out.	page 1.11.
	You are doing in the Add/	Check the display to see if there is
Operation Not		any scheduled job. The display
	Cancel operation, but
Assigned		should indicate them in Standby
	there is no jobs waiting.
		Mode, for example, Delay Fax.

8.12 TROUBLESHOOTING