Xerox WorkCentre PE16 manual Sending a Fax Automatically, Is enabled only if the remote machine

Mode	Recommended for:
	Documents with colours. Sending a colour fax
	is enabled only if the remote machine
Color(Colour)	supports colour fax reception and you send
	the fax manually. In this mode, the memory
	transmission is not available.

NOTES:

•For the memory transmission, the super fine mode is not available. The resolution setting is automatically changed to Fine.

•When your machine is set to Super Fine resolution and the

remote fax machine does not support the Super Fine resolution,

the machine transmits using the highest resolution mode 2 supported by the remote fax machine.

Sending a Fax Automatically

1Load the document(s) face up into the ADF.

OR

Place a single document face down on the document glass. For details about loading a document, see page 2.2.

2Adjust the document resolution to suit your fax needs (see page 2.4).

If you need to change the contrast, see page 1.13.

3Enter the remote fax phone number using the number keypad.

You can use one or two-digit speed or group dial numbers. For details, see Chapter 3, "Automatic Dialling."

4Press Start Copy/Fax.

5When the document is loaded on the document glass, the display shows “Another Page?” on the top line after the document is scanned into the memory. If you have the next page, remove the scanned page and load the next page on the glass and select “1.Yes.” Repeat as necessary.

After all of the pages are scanned, select “2.No” when the display shows “Another Page?.”

GENERAL FAX FUNCTIONS 2.5