Xerox WorkCentre PE16 manual Up or 4-up Copying, Poster Copying

1 2


2-up copying

1 2

3 4


4-up copying

2-up or 4-up Copying

The 2 or 4-up copying feature is available only when you load documents in the ADF.

1Load the documents to be copied in the ADF.

2Press Special.

3Press Special or the scroll button ( or ) until “2-Up” or “4-Up” displays on the bottom line.

4Press Enter to save the selection.

5If necessary, customise the copy settings including number of copies, contrast and image type by using the control panel buttons. See “Setting Copy Options” on page 4.6.

NOTE: You cannot adjust the copy size using the Reduce/ Enlarge button for making a 2 or 4-up copy.

6Press Start Copy/Fax to begin copying.

NOTE: 2-up copy reduces your original document by 50 %. 4-up copy reduces the document by the following rates depending on the paper loaded: 76 % for Letter, 81 % for A4 and 95 % for Legal.

Poster Copying

This special copy mode can be applied when you load document only using the document glass. If a document is detected in the ADF, the Poster copying feature does not work.

1Load the documents to be copied on the document glass and close the cover.

2Press Special.

3Press Special or the scroll button ( or ) until “Poster” displays on the bottom line.

4Press Enter to save the selection.

4.12 COPYING