Xerox WorkCentre PE16 manual Using Special Copy Features, Number of Copies, Press No. of Copies

Number of Copies

Using the No. of Copies button, you can select the number of copies from 1 to 99.

1Press No. of Copies.

2Press the scroll button ( or ) until the number you want appears on the display.

Pressing and holding the button allows you to quickly scroll to the number you want.

you can enter the value using the number keypad.

3Press Enter to save the selection.

Using Special Copy Features

You can use the following copy features using the Special button on the control panel:

•Auto Fit: Automatically reduces or enlarges the original image to fit on the paper currently loaded in the machine. See below.

•Clone: Prints multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. See page 4.9.

•Collation: Sorts the copy job. For example, if you make 2 copies of 3 page documents, one complete 3 page document will print followed by the second complete document. See page 4.10.

•2-Side: Prints 2-sided original document on one sheet of paper. See page 4.11.

•2/4-Up: Prints 2/4 original images reduced to fit onto one sheet of paper. See page 4.12.

•Poster: Prints an image onto 9 sheets of paper (3x3). You can paste the printed pages together to make one poster- size document. See page 4.12.

NOTE: Some features may not be available depending on where you loaded the document, on the document glass or in the Automatic Document Feeder.

4.8 COPYING