Colour System Set, About Ntsc Playback, OK or% | JVC HR-DD858E/EH

10EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

– –:– –

1 2 3

2

4 5 6

7 8 9

0

4

1

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press

.

ACCESS MAIN MENU

SCREEN

2 Press MENU.

ACCESS MODE SET SCREEN

Press %Þ to move the

MAIN MENU

highlight bar (pointer) to

3 "MODE SET", then press

MODE SET

AUTO CH SET

OK or%.

MANUAL CH SET

INITIAL SET

● "REC LEVEL CTL"

REC LEVEL CTL

appears only with the

HR-DD858E and HR-

DD858EH.

[5°] =

[MENU] : EXIT

SELECT COLOUR SYSTEM

4

MODE

Press %Þ to move the

MODE SET

highlight bar (pointer) to

AUTO TIMER

OFF

SYSTEM", then

O. S. D.

ON

"COLOUR

%

to select the

press OK or

B. E. S. T.

ON

appropriate colour system.

AUTO SP=LP TIMER

OFF

POWER SAVE

OFF

AV2 SELECT

AV2

COLOUR SYSTEM PAL/NTSC

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

●"POWER SAVE" appears only with the HR-J758E and HR-DD858E.

RETURN TO NORMAL

SCREEN

5 Press MENU.

Image 10

JVC HR-DD858E/EH Colour System Set, About Ntsc Playback, OK or%, Appears only with HR-DD858E and HR DD858EH, SYSTEM, then

Contents

HR-DD858E/EH HR-J758E/EH For Italy Safety PrecautionsDo not place the recorder Situate Recorder Check ContentsBasic Connections Connect Recorder to Mains If you are referring to the on-screen display Auto Set UpIf you are referring to the front display panel International Telephone Country Code Video Channel Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer to Just Clock If both auto channel set and auto clock set have failedLanguage for the on-screen display Just Clock on Language ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenAccess Mode SET Screen On-Screen Displays Select Power Save Mode Power Save ModeOK or % OK or% Colour System SetAbout Ntsc Playback Appears only with HR-DD858E and HR DD858EH Point Basic PlaybackLoad a Cassette Start Playback Activate HIGH-SPEED Search Playback FeaturesPause During Playback Still Picture/Frame-By-Frame Playback For HR-J758E/EH High-Speed Turbo Search For HR-J758E/EHSlow Motion For HR-J758E/EH Override Automatic Tracking Adjust TrackingActivate 3R Picture Manually Sections Skip Over UnwantedActivate Instant Review Soundtrack Selection Activate SpatializerSpatializer During Playback Repeat Playback Variable-Speed Search HR-DD858E/EH only Audio signal during TimeScanTimeScan Press Pause Press TV Prog + or so that the vibration stops Speed SP Speed LP Audio output TimeScanTimeScan Audio HR-DD858EHR-DD858EH Basic Recording Recording Features To Record Stereo And Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesType of Broadcast On-screen Display Being Received Adjust Audio Hi-Fi Audio Recording Level Control HR-DD858E/EH only S.T. Picture System Select B.E.S.T. ModePreparation Or press Record on the recorder RecordingPlayback During B.E.S.T Timer Programming Timer Warning Satellite Tuner Users Enter Programme Stop Express Timer ProgrammingStart Time Time Engage RECORDER’S SET VPS/PDC ModeTimer Mode VPS/PDC Recording Press Again to check More information. Each Check, Cancel And Replace ProgrammesPress Time you press Auto Timer Auto SP→LP TimerFor Example Automatic Satellite Programme Recording Prog REC ModeBefore performing the following steps SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY Power Operate TV TV/VCR, TV +/- VolumeSET TV Brand Code TV Prog + Before you start Satellite Tuner Multi-Brand Remote ControlOperate Satellite Tuner Satellite Tuner Brand Code Make Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source Player AV2 Select Setting Start Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start Recorder Engage Audio Dubbing SET Input ModeLocate Start Point Start Dubbing Locate END Point Reset the CounterInsert Editing Prog Start Editing Engage Insert EditingEND Insert Editing Satellite Tuner Unit Connection To Satellite TunerBack of Recorder Connect Decoder Connecting Using a DecoderSelect Input Mode SET Tuner Connecting Using a Stereo System AUX in or Tape Monitor Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video Channel Tuner Set Auto Channel Set Perform Auto Channel SET View Confirmation Screen Enter NEW Channel Information Storing Channels Manually Delete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Channel SET Screen Access ManualSwitch Stations Select NEW Station TV Station And ID List Station Name Select Channel to FINE-TUNE Perform TuningFine-Tuning Channels Already Stored Press OK twice. The Manual Channel Set screen appears Enter Receiving Channel Position Number Showview SetupNumber Guide Program Number Set Clock Set Access Initial SET ScreenAccess Clock SET Screen SET Date and Time SET Clock Data Source Channel Position SET Just ClockStart Clock Operation Mains power cord is discon- nected No power is applied to the recorderRemote control wont function If you’re using the RF OUT connec- tion Timer Recording EN Questions and Answers Ä remain lit on the display panel. Is there Problem? Index EN Index HR-DD858E/EH only Remote Control IN/OUT x 1, IN/DECODER x Maximum recording timeFrequency synthesized tuner Memo International Telephone Language Code Ex. Francais is selected for BelgiumFor More Information see INSTRUCTIONS/P4