E
N
21
Recording Features
RECORD
– | – |
|
TV/VCR
Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO
WATCH
1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.
●If a decoder is connected to the recorder (☞ pg. 43), you can select a scrambled channel as well with the TV channel controls.
1 2 3
4 5 6
7 8 9
2
Elapsed Recording Time Indication
0000
0
4
TV PROG
You can check the exact time of a recording.
SET COUNTER DISPLAY
1 Press –
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours (selectable in
START RECORDING
1 Press RECORD on the recorder.
ENGAGE ITR MODE
2 Press RECORD again. "
" blinks and 0:30 appears on the front display panel.
SET RECORDING DURATION
3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the recorder's front panel.
●The
2 |
| RESET COUNTER |
Press 0000 before starting recording or playback. | ||
|
| |
| ● The counter is reset to “0:00:00” and shows the exact | |
| elapsed time as the tape runs. | |
Tape Remaining Time
DISPLAY REMAINING TIME
1 Press –
●The display panel shows the tape remaining time with "
" displayed.
●By pressing the –
*channel position is not displayed during playback.
●The
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "–
