JVC HR-J758E/EH, HR-DD858E/EH specifications Timer Warning, Satellite Tuner Users

VPS/PDC

STOP+/–

1

4

7

	– –:– –
2	DAILY
	3

5 6

8 9

0

2

WEEKLY

4

				E	N	27
	SET TAPE SPEED
4 Press SP/LP (			) to set the tape speed.
5	SET VPS/PDC MODE
	Press VPS/PDC to select "ON" or "OFF".
	If "VPS/PDC	ON" is displayed on the screen or "VPS/
	PDC" is lit on the display panel, VPS/PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
	is not lit on the display panel, VPS/PDC is set to OFF.
	☞ "VPS/PDC Recording" on page 29.
	RETURN TO NORMAL SCREEN
	Press PROG or OK. "PROGRAM COMPLETED" appears
	on the screen for about 5 seconds, then normal screen
6 appears.
	● Repeat steps 1 – 6 for each additional programme.

PROG

1

ENGAGE RECORDER’S TIMER MODE

	SP/LP
3	OK

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

1Set "AV2 SELECT" to "AV2" (☞ pg. 37).

2 Perform steps 1 – 7.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

7	Press ä (TIMER). The recorder turns off automatically
		and äappears on the display panel.
		● To disengage the timer, press ä (TIMER) again.

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 30).

● It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with "0".

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

●Press the NUMBER keys or %Þ to input the channel position number on which your recorder receives that

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

station, then press OK or %. The SHOWVIEW program screen appears.

GUIDE PROG SET

			(Ex.) To timer-record a ZDF
GUIDE PROG		TV PROG	programme with SHOWVIEW.
			* If your recorder receives
	2	– –	ZDF on the channel
			position 2, press OK or%
			after entering "2".
[5°] =
[PROG] : EXIT

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .