JVC HR-DD949EE specifications Engage RECORDER’S, Timer Mode, Press TV Prog +

		2
	1	2
	4	5
:VPS	7	8
		0

3

1

DAILY3 6

9	WEEKLY
	TIMER
	4
	TV PROG+/–

OK

					E	N			27
6	ENTER CHANNEL POSITION
	Press TV PROG +/–.			– P1 –
		START					STOP
		21:00		=			22:00
			SP					ON
		DATE				TV PROG
		25.12						1
		[+/–] =
		[MENU] : EXIT

SP

IMPORTANT

Be sure to confirm the setting of VPS recording.

● If " ON" is displayed on the screen or "	" is lit
on the display panel, VPS is set to ON.
● If " OFF" is displayed on the screen or "	" is
not lit on the display panel, VPS is set to OFF.
To change the setting, press : VPS (NUMBER key
"7").
☞ "VPS Recording" on page 29.

7	SET TAPE SPEED
	Press (SP/LP) to set the tape speed.
	RETURN TO NORMAL
8	SCREEN
	After confirming all information is correct, press OK
	and the normal screen appears.
	● Repeat steps 1–8for each additional programme.
	ENGAGE RECORDER’S
9	TIMER MODE
	Press TIMER. The recorder turns off automatically.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 28).