|
|
|
|
|
|
|
|
| E |
| N |
| 35 |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| Audio dubbing replaces the normal audio sound of a previously | |||||||
|
|
|
|
|
| ||||||||
|
|
|
|
|
| ||||||||
Audio Dubbing recorded tape with a new soundtrack. |
|
|
|
|
| ||||||||
|
|
|
|
|
| Normal audio track |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. DUB | PLAY | |
|
| 8 |
6 |
| 5/8 |
q | 1 | Á |
PAUSE |
| STOP/EJECT |
CD Player etc.
CD Player etc.
Mixer output | Audio mixer |
Original sound
AUDIO OUT
|
| 8 |
6 |
| 5/8 |
q | 1 | Á |
NOTES:
●When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound
●Audio dubbing stops automatically when the counter reaches "0:00:00", and the recorder enters the Play mode. Check the counter reading before dubbing.
●Audio dubbing is also possible using the rear panel AV1 IN/ OUT or AV2 IN connector. When using these connectors, make sure to select the correct input mode in step 2.
●Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
●When playing back an
MAKE CONNECTIONS
1 Connect an audio component to the AUDIO IN L + R connectors on the recorder's front panel.
●When connecting monaural equipment, use only the recorder's AUDIO IN L connector.
| SET INPUT MODE | ||
| Press NUMBER key "0" and/or TV PROG so that | ||
2 appears in place of a channel number. | |||
| LOCATE START POINT | ||
| Press PLAY to start playback of the tape in your | ||
| recorder, and press PAUSE when you find the point | ||
3 where you want to start dubbing. | |||
4 | ENGAGE AUDIO DUBBING | ||
Press A. DUB. |
| ||
| |||
● Your recorder enters the Audio Dubbing Pause mode. | |||
(" | " blinks, " | " and " " light up on the front | |
| display panel.) |
| |
| ● To perform audio dubbbing with audio mixing, press | ||
| AUDIO MONITOR on the remote control to select "L | ||
| + R" at this point. *Audio dubbing with audio mixing | ||
| is not possible if you're using a monaural audio | ||
| component, or if you don't have an audio mixer. | ||
|
| ||
| START DUBBING | ||
| Engage the audio component's Play mode, then press | ||
| PLAY to start the tape in your recorder. Audio dubbing | ||
5 begins at this point. |
| ||
| ● " | " blinks and " | " is displayed on the front |
| display panel. |
| |
| ● To stop dubbing temporarily, press PAUSE. Press | ||
| PLAY to resume dubbing. | ||
|
| ||
| END AUDIO DUBBING | ||
| Press STOP/EJECT to stop the tape in your recorder, and | ||
6 engage the audio component's Stop mode. | |||
