INSTALLINGYOURNEWRECORDEREN3

Basic Connections

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

CHECK CONTENTS

Make sure the package contains all of the accessories

1 listed in “Specifications” (pg. 51).

Aerial terminal

Back of TV

21-pin SCART connector

RF Cable

(provided)

21-pin SCART Cable

AV1 IN/OUT

Mains Power

Cord

Mains outlet

TV Aerial

Cable

Rear view

 

SITUATE RECORDER

2 Place the recorder on a stable, horizontal surface.

 

CONNECT RECORDER TO

 

3

TV

The connection method you use depends on the type of

TV you have.

 

 

RF CONNECTION

 

To Connect To A TV With NO AV Input Terminals . . .

 

a– Disconnect the TV aerial cable from the TV.

 

b– Connect the TV aerial cable to the ANT. IN jack

 

on the rear panel of the recorder.

 

c– Connect the provided RF cable between the RF

 

OUT jack on the rear panel of the recorder and the

 

TV’s aerial terminal.

 

Before operating the recorder, make sure the

 

TV’s channel is set to the VIDEO channel

 

(pg. 6).

AV CONNECTION

To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the AV1 IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

AUDIO OUT(put) connectors

For connection to the audio input connctors on a Hi-Fi stereo system

4 Plug the end of the mains power cord into a mains outlet.

After you plug the mains power cord into a mains outlet, the Auto Set Up display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder pg. 4.

If TV has no 21-pin SCART connector:

Connect an optional AV cable between the TV's AV-IN terminals and the AV1 IN/OUT connector on the rear panel of the recorder via the optional output cable adapter as illustrated.

TV

Output cable adapter (not provided)

 

AV cable

 

(not provided)

 

Recorder

To AV-IN

To AV1 IN/OUT

terminals

connector

 

Page 3
Image 3
JVC HR-DD949EE specifications Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains