JVC HR-E439EG, HR-E239EG Information On ShowView, Access CH. SET Mode Menu Screen, Select Mode

20ENTIMERRECORDING

Information On ShowView

Turn on the TV and select the VIDEO channel (or AV mode).

+		000	0
	000	0	000
	000		0000
	000		0
–	000		000
	000		000
	00		00

With ShowView, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

NOTE:

“Guide Prog. Number” (GUIDE PROG) refers to the assigned TV station numbers, according to broadcast area, for ShowView timer recording.

IMPORTANT

Perform the following procedure after the channel setting steps on pages 5 and 31 – 32, and after the Clock Set procedure on page 7.

After setting the Guide Prog. Numbers, the station names and channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Prog. Number setting.

Guide Prog. Number Set

CH SET

		2
	1	2	3
NUMBER	4	5	6
	7	8	9
CANCEL		0

1

2

MAKE LIST OF STORED STATION NAMES AND CHANNEL POSITIONS

(Ex.) Channel position Station name

1ARD

2ZDF

3WDR

ACCESS CH. SET MODE MENU SCREEN

Press and hold CH SET for over 2 seconds. The Language screen appears. Press OK to access the Ch. Set Mode Menu screen.

3

1

PUSH JOG

OK

3

SELECT MODE

Press PUSH JOG%Þ to place the pointer next to “GUIDE PROG SET”, then press OK. The Guide Prog. Set screen appears.

AUTO CH SET MANUAL CH SET GUIDE PROG SET

[5°] = [CANCEL] : EXIT