JVC HR-E239EG, HR-E439EG specifications Clock Set, Turn the Recorder on, Preparation

EN

7

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

If you performed Auto Channel Set (☞ pg. 5), the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 60 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Tuner Set was performed.

OPERATE

+
		0	00
	000	00	00
		0	000
	000		0000
	000		0
–	000		000
	000		000
	00		00

OPERATE

	2
1	2	3

CLOCK	5	6
4
7	8	9
	0

TV/VIDEO

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Clock Set and Auto Clock screens, and can be set “ON” or “OFF” (the default setting is “ON”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%Þto change the setting.

IMPORTANT: If you turn off Just Clock off, the accuracy of your recorder’s built-in clock may be reduced, which could adversely effect timer recording.

Both Auto and Manual clock setting procedures begin from step 3.

Preparation

TURN THE RECORDER ON

1 Press OPERATE.
	ACCESS CLOCK SET SCREEN
	Press CLOCK on the	CLOCK SET
	remote control. The Clock
2 Set screen appears.		TIME	DATE	YEAR
		0: 00	01 . 01	00
		JUST	CLOCK: ON
		TV PR.	1
		[5]: AUTO CLOCK
		[5°] =
		[CLOCK] : EXIT

3

1

PUSH JOG

CONTINUED ON NEXT PAGE.

OK