JVC HR-E239EG Activate HIGH-SPEED Search, Override Automatic Tracking, Adjust Tracking, Manually

Slow Motion

ACTIVATE SLOW-MOTION PLAYBACK

During playback or still, turn the SHUTTLE ring to the
right for forward slow motion, or to the left for reverse
1 slow motion (refer to the illustration on the previous page).
OR
During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.
OR
During still picture, press and hold PUSH JOG%or	%.
Release to return to still picture.
To resume normal playback, press PLAY.

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on the previous page).

OR

During playback, press PUSH JOG % or %.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY.

High-Speed (Turbo) Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search.

●For forward search with a visible picture, turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse search with a visible picture, turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

Press FF for forward high-speed search, or REW for reverse high-speed search.

●For short searches, press and hold FF or REW for over 2 seconds. When released, normal playback resumes.

To resume normal playback, press PLAY.

EN11

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.

OVERRIDE AUTOMATIC

TRACKING

	Press SP/LP (	) on the remote to engage manual
1 tracking.
	ADJUST TRACKING
	MANUALLY
2 Press TV PROG. + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press SP/LP (	) on the remote to re-engage auto-
3 matic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REV 3” appears and blinks. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.