initial settings18
Manual Channel Setup
get to the main menu Press MENU. Select the icon PR SET using
the * and Tbuttons and press OK. The Manual Channel Set
screen of the channel position currently received appears.
get to the confirmation screen Press MENU.
select position Press the ^ and & buttons on the Remote
Control to select a vacant position then press OK.
In this example, we have chosen position6.
select band When the MANUAL CH
SET screen appears, press AV to
change the band between C (regular)
and S (cable).
input channel number Press the ^ and & buttons to input the
Channel Number that you want to store and press T.
OR
Press the number keys to input the Channel Number that you want
to store. Input “0” before any single number entries.
fine tuning Press Tto select MFT setting. Press the ^ and & buttons to fine-tune the channel.
input channel id Press Tto select STATION setting and press OK. Press the ^ and & buttons
to select the required ID from the stored list.
save new channel details Press MENU to save the details you have just entered. The
Confirmation Screen will appear again. Repeat the above procedure from Select Position onwards
as many times as required.
close confirmation screen Press MENU.
PR SET
MOVE:
DELETE:
01 C03 00 ARD
02 C02 00 ZDF
03 S11 BR3
04 S40 WDR3
05 C02 00 HR3
06 - - - - - - - - -
07
- - - -
- - - - - - -
08
- - - - - - -
00
00
CHANNEL/CABLE :AV
PR
06 00
CH MFT STATION
C- -
HR-J295EK-EN/p17-22 2/27/2, 2:58 PM18