4ENINSTALLINGYOURNEWVCR

Basic Connections

Connect the power plug to an AC outlet before installing the lithium battery. (See below)

AC Outlet

AC Power Cord

Antenna or Cable

ANT. IN

(Antenna or Cable input)

 

Coaxial Cable

 

Flat Feeder

 

Matching Transformer

 

(not supplied)

 

Back of VCR

. IN

OUT

AUDIO

RF OUT

VIDEO

CH3 CH4

Back of VCR

 

VID

CH3

CH4

TV

Audio/Video Cable

RF OUT

 

(not supplied)

 

75 ohm terminal

RF Cable

(supplied)

300 ohm terminal

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 38
Image 38
JVC HR-J4006UM manual Basic Connections, EN Installing Your NEW VCR, Back of VCR, Installing/Removing the lithium battery