PROG |
|
|
|
|
. |
|
|
|
|
| 1 |
|
|
|
UMBER | 1 | 2 | 3 |
|
4 | 5 | 6 | 2 | |
|
| |||
"8" |
|
|
| |
| 7 | 8 | 9 |
|
SP/EP |
| 0 | 4 |
|
|
|
| ||
•• | •• |
3
OK
NUMBER "9"
TIMER
EN
23
SET TAPE SPEED
7 Press SP/EP to set the tape speed.
RETURN TO NORMAL
SCREEN
8 Press PROG. or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.
ENGAGE TIMER MODE
9 Press TIMER. The VCR turns off automatically and "ä" is displayed on the display panel.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.
●Programs that start after midnight must have the next day’s date.
●After timer recording is completed, the VCR’s power goes off automatically.
●You can program the timer while a regular recording is in progress; the
●If the end of tape is reached during timer recording, the cassette is automatically ejected.
●When
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
| ||
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
| ||||
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 | |
