JVC HR-J4008UM Timer Recording

Page 11 March 26, 2001 12:31 pm

During recording, press REC (7) on the VCR repeatedly until the

recording length you want appears on the display panel. The

record indicator (䡬) on the display panel starts blinking.

●Each time you press the button, record ing length increases in

30-minute intervals (up to 6hours).

●The VCR shuts off after recording is finis hed.

●To cancel an ITR, press STOP (8) on the Remote or STOP/EJECT

(0) on the VCR.

During recording…

●If you connect the TV and the VCR only using the RF

connection to view pictures from the VCR, press TV/VCR on the

Remote so that VCR mode indicator goes off from the display

panel. (The TV broadcast being recorded disappears.)

●If you are using the AV connection to view pictures from the

VCR, change the TV’s input mode from AV to TV.

Then, select the channel you want to watch, on the TV.

If there is a power outage during recording (or Instant Timer

Recording, or timer recording), the recording will resume

automatically when the power is restored to the VCR. (No setting

is required for this function.)

Timer Recording

Up to 8t imer recording programs can be made using Express

timer programing method as far as a year in advance. Remember,

the clock must be set before you can program the timer.

NOTES:

●If all the 8prog rams have already been set, “PROGRAM FULL”

appears on the TV screen.

●After timer recording is completed, the VCR turn s off

automatically.

●You can program the timer recording while a regular recording

is in progress; the menu screens will not be reco rded.

●To timer-record cable channels, be sure to keep the cable box

turned on with the correct channel selected.

●In case of a power failure after programming, the VCR’s memory

backup keeps your selections (if the lithium battery is not

exhausted).

Load a cassette with the record safety tab intact. The VCR turns

on, and the counter is reset, automatically.

HR-J4008UM-EN.fm Page 11 Monday, March 26, 2001 12:31 PM