Page 4 March 26, 2001 5:23 pm
Remote
* VPS/PDC is not currently available in south America and not
possible with this VCR.
You can operate JVC’s TV
Buttons (TV/VCR, TVPR+/–, POWER1, ^, TV %+/–) with a
small dot on the left side of the name can also be used to operate
a JVC’s TV while holding down TV on the Remote.
This Remote transmits A code signals only; it is not applicable to B
code signals.
On-screen display
If you press OK on the Remote when “SUPERIMPOSE” is set to
“ON”, you can see the current VCR status on the TV screen. After
about 5 seconds, indications other than the time counter
disappear. To clear the time counter, press OK again.
The indications are not recorded even if the VCR is in the
recording mode.
AChannel and auxiliary input
BDay and clock time
CTime counter
DIndex number
ETape position
FCassette mark
GTape sp eed
HVCR operation mode
ITimer warning display
Number keys
B+++ E
CH125 RECORD
THU 12:00 AM PAUSE
STEREO –WARNING– SP
SAP TIMER RECORDING
TO START SOON
(CANCEL)
INDEX 1
NORM
HI-FI COUNT –1:23:45
– Buttons, Connectors and Indicators –
HR-J4008UM-EN.fm Page 4 Monday, March 26, 2001 5:23 PM