– Timer Recording –
APress PROG on the Remote to access the Program screen.
B Press
time, stop time, date or channel.
● Press and hold START+/– or STOP+/– to increase the time in
● To set the tape speed, press SP/EP (p).
● To
Checking, canceling or changing program settings
ADisengage timer
Press #, then press 1.
●When “AUTO TIMER” is set to “ON”, you do not have to press
#.
press DAILY or WEEKLY. Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.
CPress OK or PROG.
●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display”.
DPress #. The VCR turns off automatically and “#” is displayed on the display panel.
To use the VCR while it is in timer recording standby mode
BAccess Program Check screen
Press " (CHECK).
CAccess Program screen
Press " (CHECK) again. Each time you press " (CHECK), the next program’s Program screen appears.
PR START | STOP | CH | DATE | ||||||
1 | 8:00P | 10:00 | 12 |
| 12/24 | ||||
2 | 10:00A | 10:45 | 40 |
| 12/25 | ||||
3 | 11:30P | 1:00 | 125 |
| 12/25 | ||||
4 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
| PRESS (CHECK) TO NEXT | ||||||||
| PROGRAM 1 |
|
|
| |||||
| START |
|
|
| STOP |
|
|
| |
| 8:00 PM |
|
|
| 10:00 PM |
| |||
| DATE |
|
|
| CH |
|
|
| |
| 12/24/00 |
|
|
| 12 |
| SP |
|
|
PRESS (CANCEL) TO CANCEL PRESS (CHECK) TO NEXT
Press #, then press 1. After you use the VCR, press # again to put the VCR into timer recording standby mode.
DCancel or change program setting
To cancel a program, press & (CANCEL) when the Program screen you do not want is shown.
To change a program, press the appropriate button:
EReturn to normal screen
Press " (CHECK) repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press #. The VCR turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.
