JVC HR-J4008UM Editing, Make connections, Load cassettes, Select input mode on recording VCR

Editing

You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.

AMake connections

Example: When using this VCR as the playback VCR

This VCR (for playback)

To AUDIO/VIDEO OUT

Audio/video cable (not supplied)

To audio/video input

Another VCR (for recording)

●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.

BLoad cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.

CSelect input mode on recording VCR

Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR);

Select “F-1” — when connecting the other VCR to the audio/video input connectors on the front panel.

On the Remote

Press AUX or CH+/–.

On the VCR

Press PAUSE[CH], and then FF[CH+] or REW[CH–]. See step B in “Basic Recording”.

DSelect edit mode

Set the edit mode to “ON” for the VCRs if such a mode is equipped.

●On this VCR, set “PICTURE CONTROL” to “EDIT”.

EStart playback

Press PLAY (4) on the playback VCR.

FStart recording

Press REC (7) on the recording VCR.