![](/images/new-backgrounds/1233427/2334275x1.webp)
INSTALLING
YOUR
NEW
RECORD
ER
3
Basic Connections
Aerial terminal
Back of TV
RF Cable (provided)
| TV | |
Aerial | ||
Cable | ||
| ||
| AV Cable | |
| (not provided) | |
Mains Power |
| |
Cord |
|
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.
| CHECK CONTENTS | |
| Make sure the package contains all of the accessories | |
1 listed in “Specifications” (☞ pg. 30). | ||
| SITUATE RECORDER |
|
2 Place the recorder on a stable, horizontal surface. | ||
| CONNECT RECORDER TO |
|
3 | TV | |
The connection method you use depends on the type of | ||
TV you have. |
| |
RF CONNECTION | ||
| ● To Connect To A TV With NO AV Input Terminals . . . | |
| a– Disconnect the TV aerial cable from the TV. | |
| b– Connect the TV aerial cable to the ANT. IN jack | |
| on the rear panel of the recorder. | |
| c– Connect the provided RF cable between the RF | |
| OUT jack on the rear panel of the recorder and the | |
| TV’s aerial terminal. | |
| After step 4, go to "Tune The TV To Your Video | |
| Recorder" on page 4. |
AV CONNECTION
●To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV’s
Mains outlet
Rear View
RF output channel adjustment screw
CONNECT RECORDER TO MAINS
4 Plug the end of the mains power cord into a mains outlet.
AUDIO OUT/ VIDEO OUT