JVC HR-J455EA specifications Auto Set Up, Perform Auto SET UP, SET Time, SET Date, SET Year

6ENINITIALSETTINGS(cont.)

Auto Set Up

Auto Channel Set

Before starting, make sure of the following:

●The TV aerial cable should be connected to the recorder.

●The recorder's mains power cord should be connected to a mains outlet. ☞ pg. 3

●The "Video Channel Set" procedure should be done first and the TV should be set to its AV mode (with AV connection ☞ pg. 5) or video channel (with RF connection ☞ pg. 4).

1 2 3

2

4 5 6

7 8 9

0 4

1

The Auto Set Up function simplifies installation by guiding you through the procedures of setting the clock and tuner channels

—simply follow the on-screen menus that appear when the button is first pressed to power on the recorder after you plug the mains power cord into a mains outlet.

IMPORTANT

●Don't press any buttons on the recorder or remote that are not directly related to the step you are performing while Auto Set Up is in progress.

●If you perform Auto Set Up successfully during installa- tion, there's no need to separately perform the Clock Set or Channel Set procedures, but if adjustments become necessary they can be performed as follows:

–To reset or adjust the time ☞ pg. 8

–To add/delete channels manually ☞ pg. 29

–To reset the tuner after moving to a different location ☞ pg. 28

PERFORM AUTO SET UP

1	Press	.
	● The Clock Set screen appears.
2	SET TIME
	Press PUSH JOG %Þto			CLOCK SET
	set the time, then press OK
	or PUSH JOG%.		TIME	DATE	YEAR
			0:00	01.01	98

●Press and hold either button to delay or

		advance the time by 30 [5/°] =
		minutes.	[MENU] : EXIT
3		SET DATE
	Press PUSH JOG %Þto set the date, then press OK or
		PUSH JOG%.

●Press and hold either button to change the date by 15 days.

SET YEAR

4 Press PUSH JOG %Þto set the year, then press MENU.

OK

PUSH JOG