JVC HR-J455EA Basic Recording, 14EN, Choose A Programme, Set Tape Speed, Start Recording

14EN

RECORDING

Basic

Recording

●Turn on the TV and select the VIDEO channel (or AV mode).

●Press VCR on the remote control to select the VCR mode.

PLAY

TV PROG

SP/LP		RECORD	STOP/EJECT	PAUSE
VCR
1	2	3
			2
4	5	6	NUMBER

7 8 9

0 4

TV PROG

SP/LP

1

PLAY

PAUSE

RECORD

3

STOP

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
	● The counter is reset to 0:00:00 and the recorder
	power comes on automatically.
2	CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
	channel you wish to record.
3	SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
	recorder display panel to confirm the selected tape
	speed.
4	START RECORDING
	Press and hold RECORD and PLAY on the remote
	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the
	cassette (☞ pg. 16).
	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.
6	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
	the recorder. Then press STOP/EJECT to remove the
	cassette.

Recording Resume

Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab