JVC HR-J455EA SET TV Brand Code, Operate TV, EN Special Feat Ures, TV Multi-brand Remote Control

32ENSPECIALFEATURES

V

VCR

TV/VCR

1 2 3

4 5 6

7 8 9

CANCEL0

1

2

4

NUMBER

TIMER

TV Multi-brand Remote Control

Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.

Before you start . . .

●Turn on the TV using its remote control.

SET TV BRAND CODE

1 Refer to the chart below. While holding down TV on the recorder's remote control, enter your TV’s brand code using the NUMBER keys, then press STOP.

Check if the TV's power goes off as it should. If it does, try other operations (☞ step 2)

●Once you have set the remote control to operate the TV, you don't have to repeat this step until you replace your remote control's battteries.

●SAMSUNG has two codes. If the TV does not function with one code, try entering another.

STOP

3 OK

TV PROG+/–

TV VOL+/–

2	OPERATE TV
	First, press TV to set the remote control to TV mode, then
	press the corresponding button:	, TV PROG +/–,
	TV/VCR, TV VOL +/– (Volume),	(Muting),
	NUMBER keys.

●For some brands of TV, you must press OK after having pressed the NUMBER keys.

ATTENTION

The remote control can operate not only the video recorder but also some of your TV's functions.

●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

●To operate your TV, first press the TV button to set the remote control to the TV mode.

Control Your TV Using Additional Buttons

Use the NUMBER keys, and the button, CANCEL button or TIMER button to select the TV’s channel.

●With televisions under Code 01, 02, 03, 05, 07, 15, 16 or

22, the button corresponds to the 1-digit/2-digit entry switching button (often labelled – /– –) of your TV’s remote control.

●With televisions under Code 01, 08, 18 or 19, the CANCEL button corresponds to the 10 + button, and the TIMER button corresponds to the 20 + button of your TV’s remote control.

NOTE:

The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.

IMPORTANT

Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

TV BRAND NAME	CODE
JVC	01
PANASONIC	02
SONY	03
SHARP	04
TOSHIBA	05
MITSUBISHI	06
HITACHI	07
SANYO	08
FUNAI	09
AIWA	10
DAEWOO	11
SAMSUNG	12, 16
LG/GOLDSTAR	13
THOMSON	14
FERGUSON	15
PHILIPS	16
GRUNDIG	17
ITT	18
MIVER	19
FINLUX	20
NOKIA	21
NEC	22