Sharp HT-SB602 operation manual Remote control, E-10

Audio connections to TVs, DVD players, VCRs, etc. (continued)

Connecting a TV, or DVD player, etc.

Connect to the TV using an optical digital cable or an audio cable.

TV

	To audio output terminals
or	To
	HEADPHONE
	terminal	Audio
Blu-Ray/	To optical
DVD player/Digital		signal
	digital audio
Tuner
	output
	terminal
Optical digital		Audio cable
audio cable		(commercially
(commercially		available)
available)
	To OPTICAL	To AUDIO IN
		input terminals
	IN (optical)
	input terminal

Note:

Make sure that the audio cable with ferrite core is connected to the sound bar AUDIO IN terminal.

Sound Bar

To select OPTICAL function:

Sound bar operation: Press INPUT button repeatedly until “OPTICAL” appears on the display.

Remote control operation: Press the “OPTICAL” button.

To select AUDIO IN function:

Sound bar operation:Press INPUT button repeatedly until “AUDIO IN” appears on the display.

Remote control operation: Press the “AUDIO IN” button.

Remote control

Battery installation

1Open the battery cover.

2Insert the batteries according to the direction indicated in the battery compartment.

When inserting or removing the battery, push them towards the battery terminals.

3Close the battery cover.

Caution:

Remove the battery if the sound bar will not be used for a long period of time. This will prevent potential damage due to battery leakage.

Do not use rechargeable battery (nickel-cadmium battery, etc.).

Installing the battery incorrectly may cause the sound bar to malfunction.

Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.

Notes concerning use:

Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size battery (UM-4, R03, HP-16 or similar).

Periodically clean the transmitter on the remote control and the sensor on the sound bar with a soft cloth.

Exposing the sensor on the sound bar to strong light may interfere with operation. Change the lighting or the direction of the sound bar.

Keep the remote control away from moisture, heat, shock, and vibrations.

E-10