Sharp HT-SB602 operation manual Bluetooth one touch connection via NFC continued, E-15, Bluetooth

Bluetooth one touch connection via NFC (continued)

NFC connection for audio playback

Check that:

Your device (smartphone / tablet) has an NFC function.

NFC function on your device is turned on.

Screen lock function of the device is off.

This unit is not in Eco mode.

1Touch your device to the NFC detection area on the subwoofer or supplied NFC tag.

NFC detection area

Or

NFC tag

2A pop-up window asking whether to proceed with the Bluetooth connection appears on the device. Select <YES>.

The ‘connected’ message appears when the connec- tion is complete.

3Playback will start automatically. Otherwise, press play (on remote control or source device).

Sound will be heard from the speakers of this unit via audio streaming.

Your device must be within 10 meters from the sound bar.

Bluetooth operation buttons (remote control only)

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.

Press the button to skip down.

Press and hold to fast reverse.

Notes:

To disconnect, simply touch your device to the NFC detection area on the subwoofer or NFC tag again.

To listen to audio via Bluetooth connectivity without NFC tag - refer “Pairing with other Bluetooth source devices” on page 16.

It takes about 6-8 seconds for a Bluetooth enabled device (eg. smartphone) to establish Bluetooth connection with this unit via NFC or manual connection.

Listening to Bluetooth enabled devices

Bluetooth

Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 meters (30 feet) without the hassle of having to use cables to connect these devices.

This unit supports the following:

Communication System: Bluetooth Specifi cation version 2.1 Bluetooth + Enhanced Data Rate (EDR).

Support Profi le : A2DP (Advanced Audio Distribution Profi le) and AVRCP (Audio/Video Remote Control Profi le)

Notes when using unit with a mobile phone

This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone.

Please refer to the operating manual supplied with the

mobile phone for details on operation of your mobile phone whilst transmitting the sound using a Bluetooth connection.

Pairing Bluetooth devices

Bluetooth devices need to be initially paired fi rst before they can exchange data. Once paired, it is not necessary to pair them again unless:

Pairing is made with more than 8 devices. Pairing can only be made one device at a time. This unit can be paired to a maximum of 8 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one.

This unit is reset. All pairing information is deleted when unit is reset.

Pairing information is deleted whilst re-pairing, etc.

E-15