Sharp HT-SB602 operation manual System connections continued

System connections (continued)

IR (Infrared) transmitter connection

If the TV’s remote sensor is blocked by the sound bar, use the IR transmitter to relay the signal to the TV.

1.Connect the IR transmitter to IR out terminal to allow the TV’s remote signal to pass through.

2.Place the infrared emitter near TV’s remote sensor (refer the operation manual of the TV for the location of the sensor ).

Point the TV’s remote control at the sound bar remote sensor and operate the TV. You may need to move the IR transmitter until the TV operates correctly.

Then secure the IR transmitter onto the sound bar using the double sided tape provided.

Note:

Do not use the IR transmitter if the TV’s remote control sensor is not blocked by the sound bar.

TV

Rear view

TV remote sensor

Double sided tape

(Peel off the double sided Infrared emitter tape separator before fi xing)

Sound Bar

TV remote control

HDMI Connection

Caution:

Turn off all other equipment before making this connection.

The illustration below shows the fl ows of the signals.

Audio and Video signal

TV

DVD/Blu-ray

Digital tuner 1. Method 1

This connection is for HDMI TV with ARC (Audio Return Channel).

TV	DVD, Blu-ray disc
	player or similar

To HDMI (TV ARC) input terminal	To HDMI output
	terminal
To HDMI OUT (TV ARC) output terminal	Sound Bar
	To HDMI input terminal

E-8