Sharp HT-SB602  Listening to the sound,  To disconnect the Bluetooth device,  Auto power on

Listening to Bluetooth enabled devices (continued)

Indicators:

Indicator	Condition	Bluetooth status
	Blinks	In waiting or pairing mode
	Lights up	Connected
No indication		Unconnected

However, the indication status is not displayed during standby mode.

Pairing with other Bluetooth source devices

1Press the POWER ON/STANDBY button to turn the power on.

2Press the INPUT button (sound bar) repeatedly or (Bluetooth) button (remote control) to select Bluetooth function. “BLUETOOTH” appears on the display.

3Sound bar operation: Press PAIRING button.

Remote control operation: Press and hold the PAIRING button for 3 seconds or more.

“START PAIRING” appears on the display. The unit is

now in pairing mode and is ready to be paired with other Bluetooth source device.

4Perform pairing procedure on the source device to detect this unit. “HT-SB602 SHARP” will appear in the detected devices list (if available) in the source device. (Refer the source device operating manual for details).

Notes:

Place the devices to be paired within 1 meter (3 feet) of each other when pairing.

Some source devices are unable to display lists of detected devices. To pair this unit with the source device, refer to the source device operating manual for details.

5Select “HT-SB602 SHARP” from the source list. If Passcode* is required, enter “0000”.

* Passcode may be called PIN Code, Passkey, PIN number or Password.

6“CONNECTED” appears on the display once the unit is successfully paired with the source device. (Pairing information is now memorised in the unit.) Some audio source devices may connect with the unit automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection.

7Press the play button on sound bar, remote control or source device to start Bluetooth streaming playback.

Notes:

If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency near the system some sound interruption may be heard.

The transmission distance of the wireless signal between the device and the sound bar is about 10 m (32 feet), but may vary depending on your operating environment. If a steel concrete or metallic wall is between the device and the sound bar, the system may not operate at all, because the wireless signal cannot penetrate metal.

If this unit or the source device is turned off before Bluetooth connection is completed, pairing will not be completed and the pairing information will not be memorised. Repeat step 1 onwards to start pairing again.

To pair with other devices, repeat steps 1 - 5 for each device. This unit can be paired to a maximum of 8 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one.

Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to pair the device again.

Listening to the sound

Check that:

The source device Bluetooth functionality is ON.

Pairing of this unit and the source device is completed.

Unit is in connected mode.

1Press the POWER ON/STANDBY button to turn the power on.

2Press the INPUT button (sound bar) repeatedly or (Bluetooth) button (remote control) to select Bluetooth function.

3Start the Bluetooth connection from the Bluetooth stereo audio source device.

4Press the Bluetooth / button.

Notes:

For various Bluetooth operations, refer “NFC connection for audio playback” on page 15.

If the source device has an extra bass function or equalizer function, set them to off to avoid sound distortion.

Note:

Make the Bluetooth connection again if the source device is not turned on, or its Bluetooth functionality is off or is in sleep mode.

To disconnect the Bluetooth device

Perform any of the followings.

–Disconnect the Bluetooth connection on the audio source device. Refer the operating manual supplied with the device.

–Turn off the Bluetooth stereo audio source device.

–Turn off this unit.

Note:

The volume of this unit may not be controlled as intended depending on the device.

Auto power on

During Standby mode, when music is played from your

device, the unit will automatically power on when the Bluetooth connection has been set up between the sound

bar and your device. They remain connected if there is no HDMI connection.

Note:

This function is not applicable during ECO mode.

E-16