Panasonic PV-HS2000 Universal Remote Control, Changing Volume Lock, Setting Up Your Components

Turn on your component with the Hard Disk Recorder off.

Universal Remote Control

Changing Volume Lock

The Hard Disk Recorder remote is set to control volume through your Hard Disk Recorder while in the CABLE, SAT(ellite), DVD, TV, or VCR modes. If your TV is not remote controllable, or you want to control volume through a different component, you can change the volume lock setting to control volume through a different mode (for example through a cable box while in TV mode). You can set the volume lock to another mode.

1 Hold down CODE SET until the remote’s red LED blinks twice, then release.

2 Press 9 - 9 - 3, then press any mode button (except TV).

•The red LED will blink twice.

Now, whenever you press VOLUME +/- or MUTE, volume will be controlled by your mode choice.

To change the volume lock setting back to TV mode...

Repeat steps 1 and 2 and substitute the TV mode button.

Setting Up Your Components

Locate the brand name of your component in the code lists on pages 45~49. The brands are listed in alphabetical order with the most popular codes for each brand listed first. You will use one of these codes to program the Hard Disk Recorder remote to operate your components.

a

b Press TV or SAT/CABLE or VCR/DVD* to select your components.

*If you want to operate TV or TV/VCR Combo volume control, press TV. If Satellite or Cable Box, press SAT/ CABLE. If VCR, TV/VCR Combo, or DVD, press VCR/DVD.

c Hold down CODE SET until the remote’s red LED blinks twice, then release.

d Press Number Buttons to enter the first four digit code of your component brand on pages 45~49.

•If you perform this procedure correctly, the red LED will blink twice when you enter the final digit of your code.

e Point the Hard Disk Recorder remote at your component, then press POWER. Your component

should turn off.

•If your component does not respond, repeat steps b-e, trying each code listed for your brand until you find the one that operates your component.

Red LED

1 CODE SET

c

e POWER b VCR/DVD

bSAT/CABLE

bTV

2 Number

dButtons

VOLUME +/-

MUTE

NOTES

•Remember, if you want to use your Hard Disk Recorder remote to operate your component, press the component’s mode button first. For example, press TV first if you want to operate your TV.

•The remote control will not operate all components made by manufactures listed. If you get no response, your particular brand cannot be controlled.

42